296Wh 300W Portable Power Station – 600W Peak, 100W USB-C & Emergency Light

Keep essential electronics powered during outages, camping trips, road travel, RV trips, and other off-grid situations with this compact 296Wh Portable Power Station. Its 80,000mAh lithium-ion battery provides up to 300W of rated AC output with a manufacturer-listed 600W peak, while 13 output connections provide multiple ways to power or charge compatible equipment.

Four 110V AC outlets, up to 100W USB-C PD output, USB-A charging, four DC outputs, a 12V vehicle-style socket, and an integrated 10W emergency light make this a versatile portable power source for emergency preparedness and outdoor use.

296Wh / 80,000mAh Portable Battery

The lithium-ion battery provides a manufacturer-rated 296Wh / 80,000mAh capacity in a portable package weighing approximately 6.6 lb.

Actual usable energy will be lower than the battery's rated capacity because power conversion, inverter operation, temperature, battery condition, connected equipment, and other operating factors consume energy.

300W Rated AC Output / 600W Peak

The four 110V AC outlets provide up to 300W total rated AC output, with a manufacturer-listed peak output of up to 600W.

The 600W figure is a short-duration peak rating and should not be interpreted as 600W of continuous operating power.

Before connecting an appliance, verify both its normal running wattage and startup or surge requirements. Devices exceeding the power station's supported output should not be connected.

13 Power Output Connections

The power station provides multiple output options for compatible electronics and small equipment:

• 4 × 110V AC outlets
• 1 × USB-C PD port — up to 100W
• 1 × QC 3.0 USB port
• 2 × Standard USB-A ports
• 4 × DC outputs
• 1 × 12V vehicle-style socket

The manufacturer describes the unit as capable of supporting up to 13 compatible devices simultaneously, but the combined electrical load must remain within the applicable output limits of the power station and individual ports.

100W USB-C PD Charging

The USB-C Power Delivery port supports output up to 100W for compatible devices.

This provides a useful high-power charging option for supported laptops, tablets, phones, cameras, and other USB-C electronics without requiring an AC charger.

Actual charging rate depends on the connected device, cable, charging protocol, battery condition, and other factors.

Three Recharging Options

The power station can be recharged several ways:

• Wall Outlet: Approximately 5–6 hours
• 12V Vehicle Outlet: Approximately 6–7 hours
• Compatible 66W Solar Panel: Approximately 5–10 hours under suitable conditions

Manufacturer information also states that the battery can reach approximately 80% capacity in about 2 hours under supported charging conditions.

Actual recharge times vary with starting battery level, charger performance, available power, temperature, solar conditions, and other factors.

Solar Charging Compatible

A compatible 66W solar panel can provide another charging option when conventional electrical power isn't available.

Solar panel is not included.

Solar charging performance varies substantially with sunlight intensity, cloud cover, temperature, panel angle, shading, cleanliness, and other environmental conditions. Manufacturer-listed solar charging times are estimates rather than guaranteed results.

Built-In 10W Emergency Light

An integrated 10W light provides four selectable modes:

• Low
• Medium
• High
• SOS

The built-in lighting can provide convenient illumination during power outages, camping trips, roadside situations, and other emergencies without requiring a separate lantern.

Battery Management System

The integrated Battery Management System provides multiple manufacturer-listed protection functions:

• Overcharge Protection
• Over-Discharge Protection
• Short-Circuit Protection
• Temperature Protection
• Overcurrent Protection
• Overload Protection

These protection systems help manage abnormal electrical conditions but do not eliminate the need to follow the manufacturer's operating and safety instructions.

Compact Portable Design

At approximately 6.6 lb, the unit provides substantial battery capacity while remaining relatively easy to transport.

An integrated carrying handle makes it convenient to move between home emergency storage, a vehicle, RV, campsite, or outdoor work area.

Specifications

Product Type: Portable Power Station
Battery Capacity: 296Wh / 80,000mAh
Battery Type: Lithium-Ion
Rated AC Output: 300W Total
Peak AC Output: 600W
AC Voltage: 110V
AC Output Waveform: Modified Sine Wave
Total Output Connections: 13
AC Outlets: 4
USB-C PD Port: 1, Up to 100W
QC 3.0 USB Port: 1
Standard USB-A Ports: 2
DC Outputs: 4
12V Vehicle-Style Socket: 1
Built-In Emergency Light: 10W
Lighting Modes: Low, Medium, High & SOS
Weight: Approximately 6.6 lb
Portable Carry Handle: Yes

Recharge Options

Wall Outlet: Approximately 5–6 Hours
12V Vehicle Outlet: Approximately 6–7 Hours
Compatible 66W Solar Panel: Approximately 5–10 Hours
Solar Panel Included: No

Safety & Protection

Battery Management System: Yes
Overcharge Protection: Yes
Over-Discharge Protection: Yes
Short-Circuit Protection: Yes
Temperature Protection: Yes
Overcurrent Protection: Yes
Overload Protection: Yes

What's Included

• 296Wh Portable Power Station
• AC Adapter & Charging Cable
• USB-C to USB-C Cable
• Vehicle / Cigarette-Lighter Plug Cord
• 12V Vehicle-Style Socket Adapter
• User Manual

Important Use Information

This power station uses a modified sine wave AC inverter. Some sensitive electronics, motor-driven equipment, medical devices, audio equipment, and other appliances may require or perform better with pure sine wave power. Check the equipment manufacturer's power requirements before connecting a device.

The 300W rating is the unit's rated AC output; the 600W figure is the manufacturer-listed peak output. Do not select equipment based solely on the 600W peak figure.

Manufacturer runtime illustrations are estimates based on assumed device wattage. Actual runtime varies with connected load, startup demand, battery condition, inverter and conversion losses, temperature, charging history, and other operating conditions.

For CPAP machines or other compatible medical equipment, follow the medical-device manufacturer's power requirements and do not rely on estimated runtime figures for critical planning.

Do not expose the power station to rain, standing water, excessive moisture, extreme temperatures, open flame, or other conditions prohibited by the manufacturer.

Use only compatible charging equipment and cables, and allow adequate ventilation around the unit during charging and operation.