4000A 24,000mAh 12V Car Jump Starter & Power Bank

Be prepared for a dead vehicle battery with this 4000A Peak 12V Car Jump Starter. Combining a powerful vehicle battery booster with a 24,000mAh rechargeable lithium battery, USB power bank, and multi-mode emergency flashlight, this compact unit is designed for roadside emergencies, vehicle preparedness, travel, and outdoor use.

Rated for 12V vehicles with gasoline engines up to 10L and diesel engines up to 8L, it provides portable starting power without requiring another vehicle.

4000A Peak Jump-Starting Power

With up to 4000A peak current, this portable battery booster is designed to jump-start compatible 12V vehicles when the vehicle battery cannot provide sufficient starting power.

The manufacturer rates the unit for gasoline engines up to 10L and diesel engines up to 8L, making it suitable for a broad range of compatible cars, trucks, motorcycles, boats, lawn equipment, and other 12V vehicles.

24,000mAh Rechargeable Battery

The built-in 24,000mAh lithium battery provides the stored energy needed for vehicle jump-starting while also allowing the unit to function as a portable backup power source.

Keeping the jump starter charged and stored in your vehicle can provide an additional layer of preparedness when traveling, commuting, camping, or driving in remote areas.

Built-In Power Bank

USB output allows the jump starter to provide backup charging power for compatible portable electronics such as:

• Smartphones
• Tablets
• Other USB-powered devices

This additional functionality makes the unit useful during roadside emergencies and power outages even when a vehicle jump-start isn't required.

3-Mode Emergency Flashlight

An integrated LED flashlight provides three lighting modes:

• Steady light
• Strobe
• SOS

Use the light for roadside visibility, nighttime vehicle problems, camping, emergency signaling, or temporary illumination during a power outage.

Smart Safety Protection

The intelligent jumper system incorporates multiple protection functions designed to help protect the jump starter, vehicle, and user from common connection and electrical problems.

Manufacturer-listed protections include:

• Reverse-polarity protection
• Spark protection
• Overcharge protection
• Reverse-charge protection
• Overcurrent protection
• Overvoltage protection
• Overload protection
• Short-circuit protection
• Low-temperature protection
• High-temperature protection

Always follow the manufacturer's connection sequence and operating instructions when jump-starting a vehicle.

Compact Vehicle Emergency Design

The jump starter combines multiple emergency functions into a relatively compact unit that can be stored in a vehicle without taking up the space required by traditional jumper cables and a second vehicle.

An included storage case helps keep the jump starter, battery clamps, and charging accessories organized together.

Specifications

Product Type: Portable vehicle jump starter and power bank
Vehicle System: 12V
Peak Current: 4000A
Battery Capacity: 24,000mAh
Gasoline Engine Rating: Up to 10L
Diesel Engine Rating: Up to 8L
Flashlight Modes: Steady, strobe, and SOS
Power Bank Function: Yes
Battery Type: Rechargeable lithium battery
Housing Material: ABS and PC

What's Included

• 1 × 4000A portable jump starter
• 1 × Smart jumper cable/clamp assembly
• 1 × Charging cable
• 1 × Storage case

Important Use Information

Fully charge the jump starter before initial use and periodically check its charge level while it is stored for emergency use.

This product is intended for compatible 12V vehicle electrical systems. Verify vehicle and battery compatibility before connecting the jump starter.

Turn off the vehicle and unnecessary electrical accessories before connecting the clamps. Connect and disconnect the jump starter only according to the manufacturer's instructions, observing correct battery polarity.

Never allow the positive and negative clamps to contact one another while the jump starter is energized.

Do not use the jump starter if the housing, battery, cables, clamps, or connectors are damaged, swollen, excessively hot, or otherwise compromised.

Keep the unit away from water, open flame, excessive heat, and conditions outside the manufacturer's specified operating and storage limits.