GOFORT A501 540Wh 500W Portable Power Station – 1000W Peak

Stay prepared for power outages, camping trips, RV travel, and off-grid situations with the GOFORT A501 Portable Power Station. Its 540Wh battery provides 500W of continuous AC power with up to 1000W peak output, giving you portable backup power for compatible electronics, small appliances, communication equipment, lighting, CPAP machines, and other essential devices.

With six 110V AC outlets plus USB-C, USB-A, and 12V DC connections, the A501 provides multiple ways to power and recharge equipment from a single portable unit. Pure sine wave AC output makes it suitable for a wide range of compatible electronics, while an integrated Battery Management System provides multiple layers of electrical protection.

540Wh Portable Power Capacity

The A501 has a 540Wh battery capacity, listed by the manufacturer as 150,000mAh at 3.7V. It provides substantial portable energy while remaining manageable enough to carry between your home, vehicle, campsite, RV, or other location.

Actual runtime varies according to the connected device, operating conditions, battery charge, conversion losses, temperature, and other factors.

500W Continuous / 1000W Peak AC Power

The A501 provides up to 500W of continuous AC output and up to 1000W peak output.

Before connecting equipment, check both its normal operating wattage and startup requirements. Devices containing motors or compressors can require substantially more power during startup than their normal rated wattage.

High-power appliances that exceed the A501's output capability should not be connected.

Six 110V AC Outlets

Six AC outlets provide convenient connections for multiple compatible devices.

The A501 also provides USB-C PD, USB-A, Quick Charge, DC, and 12V vehicle-style output options for charging or powering compatible equipment without relying exclusively on its AC inverter.

Multiple Power Outputs

• 6 × 110V AC outlets with 500W total continuous AC output
• 1 × USB-C PD 60W output
• 1 × USB-C PD 33W output
• 3 × USB-A 5V/2.4A outputs
• 1 × USB-A QC 3.0 18W output
• DC output up to 12V/10A, 120W maximum
• 1 × 12V vehicle-style socket

Always stay within the power station's total output limitations when operating multiple devices simultaneously.

Pure Sine Wave AC Output

The A501 uses pure sine wave AC output, providing cleaner AC power for compatible electronics and appliances.

This makes it useful for equipment such as laptops, monitors, routers, projectors, CPAP machines, and other compatible devices that fall within the power station's operating and startup limits.

Three Recharging Methods

The A501 can be recharged from multiple power sources, providing flexibility at home, on the road, or away from the electrical grid.

AC Outlet: Approximately 6 hours under appropriate conditions
12V Vehicle Charging: Approximately 8 hours
Compatible GOFORT 100W Solar Panel: Approximately 9–10.5 hours
Compatible GOFORT 60W Solar Panel: Approximately 10–13 hours

Solar charging times depend heavily on sunlight intensity, weather, temperature, panel positioning, and other environmental conditions.

Compatible solar panels are sold separately unless specifically stated as included with the selected package.

Battery Management System

The integrated Battery Management System is designed to help protect the power station during charging and operation.

Protection features include:

• Over-temperature protection
• Short-circuit protection
• Over-discharge protection
• Over-power protection
• Overcharge protection
• Overvoltage protection

Portable Design

An integrated carrying handle makes the A501 easier to transport between locations. At approximately 14.1 lb, it provides a balance between substantial battery capacity and portability for emergency preparedness, camping, RV travel, and other applications.

Unlike a gasoline generator, the battery-powered A501 does not produce combustion exhaust during operation. Always follow the manufacturer's charging, ventilation, temperature, storage, and operating instructions.

Estimated Device Runtime

Manufacturer examples illustrate the types of compatible equipment that may be operated or charged from the A501. Actual results will vary.

A useful approximate runtime calculation for compatible devices is:

540Wh × 0.85 ÷ Device Wattage = Approximate Runtime in Hours

For example, a device continuously consuming 100W may operate for approximately 4.6 hours under suitable conditions.

This is an estimate rather than a guaranteed runtime because inverter efficiency, temperature, battery condition, device behavior, and other factors affect actual performance.

CPAP Use

The A501 can power compatible CPAP machines through its 110V AC output or an appropriate compatible 12V DC connection.

When supported by the CPAP equipment, a compatible DC-to-DC connection may reduce conversion losses compared with operating through the AC inverter. Power-intensive CPAP features such as heated humidification can significantly reduce runtime.

Always verify the specific CPAP's voltage, wattage, connector, and startup requirements before use.

Specifications

Brand: GOFORT
Model: A501
Product Type: Portable Power Station
Battery Capacity: 540Wh / 150,000mAh at 3.7V
Continuous AC Output: 500W
Peak AC Output: 1000W
Standard AC Output Voltage: 110V
AC Outlets: 6
USB-C PD Output 1: 60W
USB-C PD Output 2: 33W
USB-A Outputs: 3 × 5V/2.4A
USB-A QC 3.0 Output: 18W
DC Output: 12V/10A, 120W Maximum
Vehicle-Style Socket: Yes
AC Waveform: Pure Sine Wave
DC Input: 5–30V/6A, 120W
LED Light: 5W
Dimensions: 12.16" × 8.54" × 9.17"
Net Weight: 14.1 lb
Operating Temperature: -4°F to 104°F
Listed Cycle Life: More Than 800 Cycles

Recommended Uses

• Emergency backup power
• Power outages
• Camping
• RV and road trips
• Off-grid use
• Compatible CPAP machines
• Phones and tablets
• Laptops and cameras
• Routers and communication equipment
• Lighting
• Compatible small appliances

Important Use Information

The 500W rating is the unit's continuous AC output, while 1000W is its peak output. A device with a rated operating wattage below 500W may still require substantially more power during startup. Always check both operating and startup requirements before connecting equipment.

If a connected device exceeds the power station's operating limits, the protection system may shut down the output.

When the power station is not needed, fully turning it off rather than leaving it in standby can help reduce unnecessary battery drain.

Solar panels are not included unless specifically identified as part of the package being purchased.

Manufacturer runtime and charging examples are estimates. Actual performance depends on connected equipment, battery condition and charge level, operating temperature, charging source, sunlight conditions, conversion losses, and other factors.

Frequently Asked Questions

Q1: What devices can the A501 500W Portable Power Station run?

The A501 provides up to 500W of continuous power with a 1000W peak output. Before connecting a device, check its rated power requirements. If a connected device exceeds 500W, the power station may automatically shut down and enter protection mode.

Devices with motors or compressors can require 2–4 times their rated wattage during startup. If the startup power exceeds the A501's 1000W peak capacity, the device may not operate properly. High-power appliances such as air conditioners, large refrigerators, microwaves, and ovens may exceed the power station's capabilities.

Q2: How long will the A501 power my device?

Estimated runtime can be calculated using:

540Wh × 0.85 ÷ Device Wattage = Approximate Runtime in Hours

For example, a device using 100W would have an estimated runtime of approximately 4.6 hours.

Actual runtime will vary depending on the connected device, operating conditions, battery charge level, and other factors.

Q3: Why does the battery lose power when it isn't being used?

If the A501 is left in standby mode, components such as the display, inverter, or power supply may continue consuming up to approximately 10W. To minimize battery drain, press and hold the power button to completely turn the unit off when it is not in use.

When using the power station for the first time, the displayed battery percentage may also require calibration. If necessary, recharge the unit to 100%, discharge it to approximately 0–1%, and then recharge it fully. Repeating this process two or three times may help calibrate the battery-level display.

Q4: What solar panels can be used to charge the A501?

The A501 can be paired with compatible GOFORT portable solar panels.

• GOFORT 100W Solar Panel: approximately 9–10.5 hours for a full charge
• GOFORT 60W Solar Panel: approximately 10–13 hours for a full charge

Solar charging times are estimates and will vary depending on sunlight intensity, weather conditions, panel positioning, and other environmental factors.

Q5: Can the A501 power a CPAP machine?

Yes. The A501 can power compatible CPAP machines using either a 110V AC connection or a compatible 12V DC connection.

When available, using a compatible DC-to-DC connection may provide greater efficiency and longer runtime than powering the CPAP through the AC inverter. Turning off unnecessary CPAP features, such as a heated humidifier, may also help extend operating time.