VEVOR 1500W PTC Greenhouse Heater with Independent Thermostat

Protect plants from cold temperatures and maintain more consistent growing conditions with the VEVOR 1500W PTC Greenhouse Heater. Designed for greenhouses, grow tents, seedling areas, and other suitable growing spaces, this compact electric heater combines fast PTC heating, an independent temperature controller, fan-only operation, and overheat protection.

The included independent thermostat allows the heater to respond to temperature conditions at the probe location, making it easier to maintain a more consistent environment for plants and seedlings.

1500W PTC Heating

The heater uses a PTC heating element with up to 1500 watts of heating power.

VEVOR rates the high setting at approximately 5,100 BTU, providing supplemental heat for appropriate greenhouse and growing applications.

Independent Thermostat Included

An independent thermostat provides more precise temperature control than relying only on the heater's built-in adjustment.

The temperature probe can monitor conditions at the desired location, allowing the thermostat to control heater operation according to the selected temperature setting.

Three Operating Settings

Choose between three operating modes according to seasonal conditions:

• Fan-only / cold-air circulation
• 800W low heat
• 1500W high heat

The fan-only setting also allows the unit to provide air circulation when heating isn't required.

Fast, Even Air Circulation

A large air outlet and integrated fan help distribute heated air through the surrounding growing area.

VEVOR specifies an airflow volume of approximately 198 m³/h, helping circulate air rather than concentrating heat immediately around the heater.

Overheat Protection

Built-in overheat protection provides an additional layer of protection if the heater's internal temperature becomes excessive.

VEVOR also identifies this exact model as ETL certified.

Compact Portable Design

The heater measures approximately 8.27" × 6.30" × 8.66" and weighs approximately 4.54 lbs., making it relatively easy to reposition when needed.

Its compact footprint helps conserve valuable floor or bench space inside smaller greenhouses and growing areas.

Greenhouse & Growing Applications

Suitable applications include:

• Greenhouses
• Grow tents
• Seedling areas
• Flower rooms
• Indoor growing spaces
• Appropriate workshops and work areas

Always use the heater according to the manufacturer's electrical, clearance, moisture, and placement requirements.

Specifications

Brand: VEVOR
Model: BGP1506-150
Product Type: Electric greenhouse heater
Heating Technology: PTC
Maximum Heating Power: 1500W
Low Heat Setting: 800W
High Heat Output: Approximately 5,100 BTU
Fan Power: 22W
Air Volume: Approximately 198 m³/h
Operating Modes: Fan only / 800W heat / 1500W heat
Independent Thermostat: Yes
Overheat Protection: Yes
Certification: ETL
Main Material: Cold-rolled plate and high-hardness alloy steel
Air Outlet Diameter: Approximately 6.5" / 165 mm
Dimensions: Approximately 8.27" × 6.30" × 8.66"
Net Weight: Approximately 4.54 lbs.

What's Included

• 1 × VEVOR 1500W PTC greenhouse heater
• 1 × Independent thermostat/temperature controller
• Manufacturer documentation

Important Use Information

This is a 1500W electric heating appliance. Connect it only to an appropriate electrical circuit and outlet meeting the manufacturer's requirements. VEVOR states that this model is designed for a 15-amp circuit.

Do not use extension cords, power strips, adapters, timers, or other electrical accessories unless specifically permitted by the manufacturer and appropriately rated for the heater's electrical load.

Maintain the manufacturer's required clearance around the heater and keep combustible materials away from the air inlet, outlet, and heating area.

Do not cover the heater or obstruct its air inlet or outlet.

Although this heater is marketed for greenhouse environments, follow the manufacturer's instructions regarding moisture exposure and placement. Do not immerse the heater, thermostat, plug, cord, or electrical connections in water.

Position the thermostat probe according to the manufacturer's instructions and away from conditions that could produce an inaccurate temperature reading.

Do not rely on the heater as the sole protection for valuable plants during extreme cold. Monitor greenhouse temperatures and provide appropriate backup measures when freezing conditions could cause significant losses.

Disconnect the heater from power before cleaning, repositioning, inspecting, or storing it.